How one motion becomes another. Gears, linkages, cams, belts.
Two toothed wheels pass rotation between parallel shafts, reversing direction and trading speed for force.
A gear meshing with a toothed bar turns rotation into straight-line travel — and back again.
A turning crank and a connecting rod drive a slider back and forth — or a pushing piston turns the crank.
A crank pin sliding in a slotted frame produces perfectly smooth, sinusoidal back-and-forth motion.
A continuously turning pin steps a slotted wheel a quarter turn, then locks it firmly in place.
A shaped disc lifts and lowers a follower. The outline of the cam is the motion program.
Four links joined in a loop turn a full rotation into a rocking swing, while the middle link traces a rich curve.
A swinging lever pushes a toothed wheel forward one tooth at a time; a second pawl stops it slipping back.
A loop of belt links two pulleys, carrying rotation across a distance in the same direction.
A crank swinging a slotted lever gives a slow working stroke and a fast return stroke.
A sun gear drives planets that roll around inside a fixed ring, turning their carrier slowly with great force.
A gear rolling inside a ring twice its size makes every point on its rim travel in a perfectly straight line.
Twisting a belt into a figure-eight makes the driven pulley turn the opposite way.
A disc mounted off-centre on its shaft acts as a crank with a tiny throw, driving a rod through a strap around its rim.
An L-shaped lever turns a push or pull through a right angle — and can scale it up or down.
Two swinging arms joined by a short link make the link's midpoint move in a nearly straight line.
The whole cylinder rocks on a pivot, so the piston rod can push straight onto the crank with no connecting rod.
Two sliders in crossed grooves joined by a bar: the sliders shuttle back and forth while the end of the bar draws an ellipse.
Two links that nearly straighten into a line multiply force enormously at the end of the stroke.
A screw-like worm turns a gear wheel at right angles, giving a huge speed reduction in one step.
Turning a threaded rod drives a nut along it — slow, precise, powerful straight-line motion.
A loop of linked rollers wraps toothed sprockets, carrying rotation over a distance without slipping.
A gear placed between two others keeps them turning the same way without changing the ratio.
A heart-shaped cam raises and lowers its follower at a perfectly steady speed.
A jointed parallelogram copies whatever the tracer point draws, enlarged (or reduced) by a fixed scale.
A rope running through a fixed and a movable pulley halves the effort needed to lift a load.
Seven bars and pivots only — yet one point moves in a mathematically perfect straight line.
A four-bar linkage whose long coupler tip runs along a near-straight line for half the cycle, then lifts and returns.
A driver with only a few teeth turns its partner for part of each revolution, then leaves it standing still.
A swinging toothed sector turns a small pinion through a much larger angle.
A gear fixed to the end of a connecting rod orbits a central gear, turning it twice per stroke cycle — no crank needed.
Two identical ellipses, each pivoted at a focus, roll together so a steady input gives a speeding-up, slowing-down output.
A curved triangle of constant width, turning inside a square yoke, pushes it up and down with pauses at each end.
Arms on a turning shaft catch a collar, lift a heavy stamp, then let it drop under its own weight.
One rope winds onto a big drum while unwinding from a small one; the load rises by only half the difference.