Skip to content
Gumption Guide
Follower liftone input turn →
Input Output Fixed frame
Mech

Cam & follower

aka Plate cam · Disc cam · Flat-faced follower

  • Rotation → Back & forth
  • Cams

A shaped disc lifts and lowers a follower. The outline of the cam is the motion program.

Rule of thumbProfile radius at each angle = follower position.

How it works

As the cam turns, the follower rides its edge. The distance from the shaft to the edge at each angle sets how high the follower sits, so any pattern of rise, pause and fall can be cut into the profile.

Gravity or a spring keeps the follower pressed against the cam. Watch the graph: the lobe gives a quick lift, then a long low dwell.

Where you meet it

  • Engine valve trains
  • Automata
  • Sewing machines
  • Music boxes
  • Locks

Tags