Output gear angleone input turn →
Mech
Spur gears
aka Gear pair · Cog wheels · Gear train
- Rotation → Rotation
- Gears
Two toothed wheels pass rotation between parallel shafts, reversing direction and trading speed for force.
Rule of thumbSpeed ratio = driver teeth ÷ driven teeth.
How it works
Teeth on the driver push teeth on the driven gear, so their pitch circles roll against each other without slipping.
The speed ratio is the tooth-count ratio. Here 12 teeth drive 20, so the output turns 0.6× as fast — with about 1.67× the torque — in the opposite direction. Put a third "idler" gear between them to keep the direction the same.
Where you meet it
- Clocks
- Gearboxes
- Hand drills
- Kitchen mixers
- Bicycle hubs